Table 5 AWWA C207-18 Class E Ring Flanges Manufacturer & Exporter

Table 5 AWWA C207-18 Class E Ring Flanges

Manufacturers and Suppliers of AWWA C207-18 Class E Hub Flanges in Various types of Material Grades. Stainless Steel AWWA C207-18 Class E Hub Flange, Hastelloy B Hub Flange, Monel AWWA C207-18 Class E Hub Flange, AWWA C207-18 Class E Inconel Hub Flange, AWWA C207-18 Class E Hub Flange, AWWA C207-18 Class E Duplex Steel Hub Flange, Alloy 20 AWWA C207-18 Class E Hub Flange.

Werner Flanges Inc. is a well-known selling unit of Table 5 AWWA C207-18 Class E Ring Flanges, which are available in different sizes. We use a range of transport partners to ship overnight this Stainless Steel AWWA C207-18 Class E Hub Flange within the foreign countries, and offer a full range of logistics solutions from priority express services to more cost – effective economy shipments all around the globe. At the prevalent low electrochemical potentials, atomic hydrogen will be generated on the surfaces of our Hastelloy B Hub Flange by the reduction of sea water. Embrittlement due to high temperature may perhaps occur when hydrogen diffuses into this Monel AWWA C207-18 Class E Hub Flange, and so hydrogen diffuses much faster in the ferrite phase than in the austenite phase.

A high mechanical stress increases the risk of high temperature in our AWWA C207-18 Class E Inconel Hub Flange by increasing the hydrogen diffusion rate, crack initiation and propagation in the material. In this AWWA C207-18 Class E Hub Flange, cracks tend to propagate in the embrittled ferrite phase and arrest at ferrite austenite phase boundaries.

Susceptibility to high temperature in our AWWA C207-18 Class E Duplex Steel Hub Flange significantly increases with increasing austenite spacing, where coarse – grained microstructures are therefore more susceptible. Alloy 20 AWWA C207-18 Class E Hub Flange are useful when aeration is not present (oxygen helps protect steel under such conditions).

Specification

Nominal Pipe Size	Outside Diameter (A)	Thickness (T)	Inside Diameter (B)	Approximate Weight (lbs)	Number of Bolt Holes	Diameter of Bolt Holes	Diameter of Bolt Circle (C)
4	9.00	1.125	4.57	14	8	0.750	7.50
5	10.00	1.188	5.66	16	8	0.875	8.50
6	11.00	1.313	6.72	22	8	0.875	9.50
8	13.50	1.500	8.72	33	8	0.875	11.75
10	16.00	1.563	10.88	47	12	1.000	14.25
12	19.00	1.750	12.88	71	12	1.000	17.00
14	21.00	1.875	14.19	94	12	1.125	18.75
16	23.50	2.000	16.19	120	16	1.125	21.25
18	25.00	2.125	18.19	127	16	1.250	22.75
20	27.50	2.375	20.19	168	20	1.250	25.00
22	29.50	2.500	22.19	189	20	1.375	27.25
24	32.00	2.625	24.19	234	20	1.375	29.50
26	34.25	2.750	26.19	270	24	1.375	31.75
28	36.50	2.750	28.19	297	28	1.375	34.00
30	38.75	2.875	30.19	344	28	1.375	36.00
32	41.75	3.000	32.19	422	28	1.625	38.50
34	43.75	3.000	34.19	460	32	1.625	40.50
36	46.00	3.125	36.19	502	32	1.625	42.75
38	48.75	3.125	38.19	580	32	1.625	45.25
40	50.75	3.250	40.19	626	36	1.625	47.25
42	53.00	3.375	42.19	701	36	1.625	49.50
44	55.25	3.375	44.19	747	40	1.625	51.75
46	57.25	3.438	46.19	794	40	1.625	53.75
48	59.50	3.500	48.19	858	44	1.625	56.00
50	61.75	3.500	50.19	887	44	1.875	58.25
52	64.00	3.625	52.19	982	44	1.875	60.50
54	66.25	3.750	54.19	1083	44	1.875	62.75
60	73.00	3.875	60.19	1313	52	1.875	69.25
66	80.00	4.250	66.19	1736	52	1.875	76.00
72	86.50	4.375	72.19	2005	60	1.875	82.50
78	93.00	4.750	78.19	2374	64	2.125	89.00
84	99.75	4.750	84.19	2719	64	2.125	95.50
90	106.50	5.125	90.19	3197	68	2.438	102.00
96	113.25	5.125	96.19	3614	68	2.438	108.50
102	120.00	5.500	102.19	4206	72	2.688	114.50
108	126.75	5.500	108.19	4700	72	2.688	120.75
114	133.50	5.875	114.19	5395	76	2.938	126.75
120	140.25	5.875	120.19	5972	76	2.938	132.75
126	147.00	6.250	126.19	6776	80	3.188	139.25
132	153.75	6.250	132.19	7443	80	3.188	145.75
138	160.50	6.750	138.19	8517	84	3.438	152.00
144	167.25	6.750	144.19	9295	84	3.438	158.25