ANSI B16.5 Class 150 Welding Neck Flanges
Buy Stainless Steel ASME B16.5 Class 150 Weld Neck Flange and Class 150 WNRF flange at lowest price in Mumbai India, Class 150 Welding Neck Flanges Stockists In India, B16.5 Welding Neck Flange 150lb Supplier, ASME B16.5 Stainless Steel Class 150 Flanges manufacturers factory in India.
Werner Flanges Inc. is one of the known manufacturers of ANSI B16.5 Class 150 Welding Neck Flanges, which are resistant to oxidation, sulphidation and carburisation. Stainless Steel ASME B16.5 Class 150 Weld Neck Flanges which are being used for several applications in different industries. We are a B16.5 Welding Neck Flange 150lb Supplier where it is a medium alloy for high temperature applications such as furnace parts and heat treatment equipment. We are capable of not just producing even large batches of standard as well as non-standard, tailor made of these ASME B16.5 Stainless Steel Class 150 Flanges, but as well specializes in manufacturing critical fasteners. Further, Weld Neck Flanges Class 900 has its pulse on the technological up-gradations and innovations of its upcoming projects.
Heat Treatment of Weld Neck Flanges Din 2576 are solution annealed by heating to temperature range 1040 -1065 Degree C, holding at temperature until thoroughly soaked, and then water quenching. However, Weld Neck Flanges Pn 160 will be sensitised to intergranular corrosion after service at temperatures in range 550 – 800 Degree C. Weld Neck Flanges B16.47 has good resistance to oxidation in intermittent service in air up to 1035 Degree C and 1050 Degree C in continuous service. Weld Neck Flanges Ansi B16.5 150 does not contain molybdenum, so pitting resistance is quite poor. Strength and hardness of Weld Neck Flanges Class 1500 can be increased by cold working.
Werner Flanges Inc. holds a wide range of Alloy Steel ASME B16.5 Class 150 Weld Neck Flange in all Thickness. Stainless Steel 150 Weld Neck Flanges Supplier in India | ASTM A182 Steel Weld Neck Flanges 150 Manufacturer | ASME B16.5 Industrial SS 150 Weld Neck Flanges., Manufacturing ANSI B16.5 Stainless Steel Class 150 Flanges in India.
Specification
| Nominal Pipe Size | Outside Diameter (O) | Thickness (T) | Raised Face Diameter (R) | Length Thru Hub (Y) | Point of Weld (A) | Hub Diameter (X) | Bore (B) | Approximate Weight (lbs) | Bolt Circle (C) | Number of Holes | Diameter of Holes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 3.50 | 0.44 | 1.38 | 1.88 | 0.84 | 1.19 | 0.62 | 2 | 2.38 | 4 | 0.63 |
| 3/4 | 3.88 | 0.50 | 1.69 | 2.06 | 1.05 | 1.50 | 0.82 | 2 | 2.75 | 4 | 0.63 |
| 1 | 4.25 | 0.56 | 2.00 | 2.19 | 1.32 | 1.94 | 1.05 | 3 | 3.13 | 4 | 0.63 |
| 1 1/4 | 4.63 | 0.63 | 2.50 | 2.25 | 1.66 | 2.31 | 1.38 | 3 | 3.50 | 4 | 0.63 |
| 1 1/2 | 5.00 | 0.69 | 2.88 | 2.44 | 1.90 | 2.56 | 1.61 | 4 | 3.88 | 4 | 0.63 |
| 2 | 6.00 | 0.75 | 3.63 | 2.50 | 2.38 | 3.06 | 2.07 | 6 | 4.75 | 4 | 0.75 |
| 2 1/2 | 7.00 | 0.88 | 4.13 | 2.75 | 2.88 | 3.56 | 2.47 | 8 | 5.50 | 4 | 0.75 |
| 3 | 7.50 | 0.94 | 5.00 | 2.75 | 3.50 | 4.25 | 3.07 | 10 | 6.00 | 4 | 0.75 |
| 3 1/2 | 8.50 | 0.94 | 5.50 | 2.81 | 4.00 | 4.81 | 3.55 | 12 | 7.00 | 8 | 0.75 |
| 4 | 9.00 | 0.94 | 6.19 | 3.00 | 4.50 | 5.31 | 4.03 | 15 | 7.50 | 8 | 0.75 |
| 5 | 10.00 | 0.94 | 7.31 | 3.50 | 5.56 | 6.44 | 5.05 | 19 | 8.50 | 8 | 0.88 |
| 6 | 11.00 | 1.00 | 8.50 | 3.50 | 6.63 | 7.56 | 6.07 | 24 | 9.50 | 8 | 0.88 |
| 8 | 13.50 | 1.13 | 10.63 | 4.00 | 8.63 | 9.69 | 7.98 | 39 | 11.75 | 8 | 0.88 |
| 10 | 16.00 | 1.19 | 12.75 | 4.00 | 10.75 | 12.00 | 10.02 | 52 | 14.25 | 12 | 1.00 |
| 12 | 19.00 | 1.25 | 15.00 | 4.50 | 12.75 | 14.38 | 12.00 | 80 | 17.00 | 12 | 1.00 |
| 14 | 21.00 | 1.38 | 16.25 | 5.00 | 14.00 | 15.75 | 13.25 | 110 | 18.75 | 12 | 1.13 |
| 16 | 23.50 | 1.44 | 18.50 | 5.00 | 16.00 | 18.00 | 15.25 | 140 | 21.25 | 16 | 1.13 |
| 18 | 25.00 | 1.56 | 21.00 | 5.50 | 18.00 | 19.88 | 17.25 | 150 | 22.75 | 16 | 1.25 |
| 20 | 27.50 | 1.69 | 23.00 | 5.69 | 20.00 | 22.00 | 19.25 | 180 | 25.00 | 20 | 1.25 |
| 22 | 29.50 | 1.81 | 25.25 | 5.88 | 22.00 | 24.25 | 21.25 | 225 | 27.25 | 20 | 1.38 |
| 24 | 32.00 | 1.88 | 27.25 | 6.00 | 24.00 | 26.13 | 23.25 | 260 | 29.50 | 20 | 1.38 |
Dimension Tolerance Welding Neck Flanges
| Certificate | Plate Thickness in mm | Width in mm | Length in mm | |
|---|---|---|---|---|
| Outside Diameter | When O is 24″ or less. When O is over 24″. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
| Diameter of Contact Face | 0.06″ (1.6 mm) raised face. 0.25″ (6.4 mm) raised face. |
±0.03″ ±0.02″ | ±0.8 mm | ±0.5mm |
| Diameter of Hub at Point of Welding | NPS 5 and smaller. NPS 6 and larger. |
+0.09″, -0.03″ +0.16″, -0.03″ | +2.4 mm, -0.8mm | +4.0 mm, -0.8 mm |
| Inside Diameter | NPS 10, 12, 18, 20 and larger. | +0.03″ +0.06″ +0.12″, -0.06″ | +0.8 mm +1.6 mm | +3.2 mm, -1.6 mm |
| Diameter of Hub at Base | Hub Base is 24″or less. Hub Base is over 24″. |
+0.06″ +0.12″ | +1.6 mm | +3.2 mm |
| Thickness | NPS 18 and smaller. NPS 20 and larger. |
+0.12″ +0.19″ | +3.2 mm | +4.8 mm |
| Drilling and Facings | Bolt circle diameter Bolt Hole Spacing | ±0.06″ ±0.03″ | ±1.6 mm | ±0.8 mm |
| Eccentricity of Bolt Circle and Facing | NPS 2 1/2 and smaller. NPS 3 and larger. |
±0.03″ ±0.06″ | ±0.8 mm | ±1.6 mm |
| Length Through Hub | NPS 10 and smaller. NPS 12 and larger. |
±0.06″ ±0.12″ | ±1.6 mm | ±3.2 mm |
Types of Welding Neck Flanges
| Weld Neck Flanges Class 900 | Weld Neck Flanges Flat Face | Weld Neck Flanges Class 1500 |
| Weld Neck Flanges Pn16 | Kf Weld Neck Flanges | Weld Neck Flanges Dn150 Pn16 |
| Weld Neck Flanges Class 2500 | Weld Neck Flanges Slip On | Weld Neck Flanges Class 600 |
| Weld Neck Flanges Din 2527 | Weld Neck Flanges Weight 150# | Weld Neck Flanges Asme B16.5 Class 300 |
| Weld Neck Flanges Din 2576 | Weld Neck Flanges With 1/2 Npt | Weld Neck Flanges Din 2633 |
| Weld Neck Flanges Pn 64 | Weld Neck Flanges Ansi B16.5 150 | Weld Neck Flanges Class 300 |
| Weld Neck Flanges Class 150 | Weld Neck Flanges Threaded | Weld Neck Flanges Din En 1092-1 |
| Weld Neck Flanges Pn10 | Weld Neck Flanges B16.47 | Weld Neck Flanges Npt |
| Weld Neck Flanges Pn40 | Weld Neck Flanges Rtj 900 | Weld Neck Flanges Jis 5k |
| Weld Neck Flanges Pn 160 | Weld Neck Flanges Rtj | Weld Neck Flanges Jis B2220 |
| WNRF With Threaded Hole | Weld Neck Flanges Ring Type Joint | ANSI B16.5 Stainless Steel Weld Neck Flange Manufacturers |
| Weld Neck Flanges Jis 10k | Weld Neck Flanges Rtj 1500 | ANSI B16.5 Class 150 Weld Neck Exporter |
Flanges we Manufacture, Export & Supply
ANSI Flanges
ASME Flanges
AWWA Flanges
ORIFICE Flanges
API 6A/6B Flanges
Spectacle Blind & Spade Flanges
Baffle Plates
BLEED / DRIP Rings
Tube Sheets
